Product Description

OCTG Pipe/Slotted Liner/Perforated Pipe Factory:

Holic Oil Pipeline Co., LTD.

Oil Slotted Pipe Basics:

The slotted pipe works by allowing certain particle size coming through the surface with crude oil while keeping the bigger size sand staying outside, and thereby the anti-sand purpose is achieved.

Line slot pattern, staggered slot pattern, multiple staggered slot pattern.

Slotted liner or pipe has several unique advantages when compared with using of perforated pipes.

Detail Features:

The slotted liner is a robust and cost-effective solution for long completions or low productivity wells.

We offer straight and key stone slot in a wide range of slotting patters to satisfy the required open area.

High rigidity resisting scrape and abrasion, high intensity, anti-corrosion and even distribution.

Main technical data:

Material: stainless steel, carbon steel

Categories of pipes: petroleum casing pipe, oil pipe

Length of pipe (single): ≤15m

Outside diameter of pipe: 50 to 200mm

Wall thickness ≤16mm

Width of slot: (0.10-0.40)mm±0.03mm

Number of slots: according to order

Distribution types of slots: parallel, crisscross, spiral

Distance of slots: according to order

Technical Details:

Slotted liner patterns illustration:

Three slot patterns are designed for different characteristics (shown below). Compared to staggered and straight slot patterns, gang slot pattern has advantages over installation torque-loading capacity and substantially improves the liner’s resistance to lateral bucking and collapse pressures.

Slotted Liner Patterns
Staggered Slotted Liner	Gang Slotted Liner	Straight slotted liner
Staggered slots features alternate slot evenly spaced around the circumference with offset.	Gang slots feature multiple slots evenly spaced around circumference in a staggered pattern.	Straight slotted liner features slot columns spaced evenly around the circumference without offset.

 

Slot profiles

Slot profile poses great importance on sand control and plugging performance. According to its different geometry, there are two slots – straight cut slot and seamed keystone slot. In almost horizontal completions in SAGD, seamed keystone slot performs much better than typical straight cut slot, and cost a little more.

Slot Shapes
Straight Cut Slot	Seamed Keystone Slot
Straight cut slots are designed for the same width through ID to OD. Straight slots feature more wear-resistant than seamed keystone slot.	Seamed keystone slot – width at the liner surface is narrower than width on the pipe interior. It features anti-plugging and self-cleaning.

Slot density

Slot density refers to the number of slots per foot of pipe. It is determined by the open area of the pipe’s outer surface. Open area is an important factor of reducing the sand control capacity of a slotted liner. Generally speaking, open area ranges from 2% to 4%.
When the open area, the slot width and the diameter of the liner are determined, the slot density per foot can be calculated by the following formula:

N =	12πD C
	100 W L

N stands for slot density or the number of slots per foot
D stands for outside diameter of the liner in inch
C stands for open area, percentage
W stands for slot width in inch
L stand for the length of slot in inch
Example: For a 4.5” slotted liner, its open area is 3%, the slot width is 0.02 inch, the slot length is 1.5’, so what is the number of slot per foot?
According to the formula above, the required Number of slots is shown below:

N =	12×π×4.5×3	= 172
	100×0.020×1.5

Note: This formula is just a conventional calculation for either straight slot or seamed keystone slot.

Adverse factors on plugging of slotted liner.

Anti-plugging is a vital element for the evaluation of slotted liners. Four factors which are probably cause plugging are found.

Slot Profile
It is proven by more and more living examples that seamed keystone slot is superior to straight slot.

Formation wettability influence on slot plugging and sand production is especially apparent when the wetting phase is in motion.

Clay concentration
Usually, clay is the main factor of slot plugging. When both granular sand and clay are present, the possibility of severe plugging is extraordinarily high.

Fluid pH is another important factor of slot plugging. Lower pH working conditions have less plugging problems. HCl solution is a good resolution of removing existing plugs.

Our advantages:

As a leading brand of OCTG products in China, Holic^® is working on providing high quality perforated/slotted pipe with most competitive price. Especially for the grades J55/K55, N80-1 and N80Q casing. Moreover, Holic^® is engaged in providing various premium connection casing pipe, for the server working conditions.